Skip to content
LOCK & ROLL CAN PACK

How to specify a packaging tray

Start with the finished item and how the buyer will lift it out. Then verify cavity spacing, tray seating and lid clearance in the actual tin.

Company image of a molded packaging insert with shaped cavities

Set the cavity layout

Record item dimensions including wrappers, quantity and orientation. Sketch the cavities, spacing and access needed to remove each item.

Check the tray against the tin drawing

Confirm usable inside footprint, corner radii, wall taper and closed-lid clearance. Define how the tray locates in the tin and which surfaces may contact the contents.

Tray fit and handling checks
CheckEvidence to requestHow to use it
CavitiesMaximum item dimensions, count, orientation and grip pointsCheck loading and removal without forcing the item.
Tray perimeterTin corner radii and internal width at the seating pointCheck that the tray seats flat and does not rock.
Loaded heightTallest item above the tray and available lid clearanceClose a sample and inspect for contact or deformation.

Validate the loaded pack

Check that the parts can be loaded and removed as intended and stay in place during agreed handling. Approve the tray and tin revisions together on a physical sample.

Buyer FAQ

Can two tins with the same listed size share one tray?

Check the inside profile and seating depth on both drawings and confirm fit in both samples before sharing a tray.