Skip to content
LOCK & ROLL CAN PACK

How Do You Measure a Tin for Three Cannabis Pre-Rolls?

Measure finished pre-rolls and verify usable cavity, insert fit, removal and closure before approving a three-unit cannabis tin.

Three pre-rolls in separate channels of a partly open black slide-lid tin.

Measure the contents and the usable cavity

Record the longest finished unit, widest diameter and any sleeve or wrap. Note where each unit reaches its maximum width. For tapered rolls, the orientation can change how the widest ends share space. Request the insert drawing and identify the tightest usable span, closure intrusion and any rounded corners on the drawing.

Measure the contents and the usable cavity
MeasureWhere it matters
Maximum lengthDistance between end stops in the actual loaded orientation
Maximum diameterCavity width at the widest part of each roll
Loaded heightClearance at the closure and at any lid features above the contents
Removal spaceRoom for fingers or the intended means of lifting each roll

Trial the three-unit layout

Place three representative rolls or dimensionally equivalent dummies in the insert. Confirm that each one sits in its intended position and check whether neighbouring rolls shift during removal. Close and reopen the tin and inspect for contact, pinching or scuffing. If access is tight, revise the insert or trial the next candidate tin before approving the drawing. Document the loaded orientation and accepted sample. LOCK & ROLL pre-roll packaging formats

LOCK & ROLL pre-roll packaging formats

Discuss your packaging project

Send LOCK & ROLL the SKU, intended contents and the sample, drawing or procurement question you want to review. Related buying guide ยท Contact LOCK & ROLL

Related buying guide Contact LOCK & ROLL

Buyer FAQ

Can I size a tin from the listed outer dimensions?

Use them to shortlist formats. Request the usable internal dimension drawing and validate the assembled sample.

Does a wider cavity always improve fit?

Extra room can make removal easier and can also let the contents move. Evaluate restraint and removal together.